Cookie Img
Send Inquiry Send SMS
Home » Products » UV Glass Adhesive » UV Glass Adhesive

UV Glass Adhesive

UV Glass Adhesive
UV Glass Adhesive
Product Code : AM 03
Brand Name : Aroon Mills
Product Description

We are renowned as one of the leading manufacturers and exporters of an excellent stock of UV Glass Adhesive. This adhesive is extensively used for bonding glass to glass and glass to metal. We process this adhesive in complete compliance with industry standards using best quality compounds procured from reputed vendors of market. This UV Glass Adhesive is stringently tested on various standard quality parameters before the final dispatch in market.

Features:

  • Low shrinkage
  • High strength bonding
  • Weather resistant

Aeroglas (U.V. Glass Adhesive)

Synthetic Resin-Acrylate Liquid Polymer

AEROGLASS is a clear liquid acrylate polymer, specificially designed solvent less one component adhesive for bonding glass to glass and glass to metal .AEROGLASS is an excellent adhesive with low shrinkage for glass to glass (AEROGLASS-G) glass to metal (AEROGLASS-M) and glass-edge to edge (AEROGLASS-E)

SPECIFICATION-

Appearence -Clear Liquid
Flash Point -  ~1.05
Viscosity @25degree c-  Between 150cps to 250cps
Specific Gravity  -   ~1.05
Reflective Index  - ~1.48 @ 25degree c
Shelf Life -       Approx.1Year .(if Kept in dark-place ,unopened at R.T)
Full Curring Time -     ~ 30 secs to 60secs via long -wave-length u.v Light.

APPLICATION.-

1) All surfaces to be bonded must be clean & dry .do not leave moisture or any cleaner on the surface before applying AEROGLASS.
2) Apply required quantity of AEROGLASS on the center of the pieces to be bonded until it spreads over entire surface to be bonded
    wait for  spreading up to the edge of the pieces .Move surfaces with little pressure such a way that trapped air bubbles , if any ,are      removed and AEROGLASS spreads evenly.

3) Keep all the pieces in final correct position and use specified U.V light energy to cure the object (with eye protection) for 30secto 60sec/(depends upon area , thickness,amount of adhesive and amount of U.V energy)
4) Do not cure in the sunlight ,as it may be harmful.

RECOMMENDATION & PRECAUTIONS-
1) Being a liquid photo polymer , always store AEROGLASS in dark-place @20degree c -25degree c. use gloves while handling adhesive.
2) Clean and wipe the adhesive by detergent /soap/cleaner with water and cloth.
3) use protective -glasses during curing with U.V light .
4) For colour -effect,we have different colours of AEROGLASS-G available on request .

PACKAGING-
1) 100gms/500gms plastic-bottle with nozzle & cap
2) 5kg /20kgplastic-carboys.


Aroon Mills
H-3, Cama Industrial Zone, Near Anna Nagar, Goregaon East, Mumbai - 400063, Maharashtra, India
Mr. Bharat H. Jhaveri (Proprietor)
Mr. Suresh Kumar Panda (Chief Executive Officer)
Factory Address :
Aroon Mills
H/3, Cama Ind Zone, Walbhat Road, Goregaon (East) Mumbai -400063
Tel No. 26852321 / 26853901
Send SMS Send Inquiry


Buyers Helpdesk

Let tradeindia.com find Quality Suppliers for you!

I agree to abide by all the Terms and Conditions of tradeindia.com
SHUBH VIJAY CHEMICALS All Rights Reserved.